Electric Arc Furnace Fittings for Submerged Arc Furnace Ladle Car Produced

Submerged arc furnace fittings ladle car

Overview:

Ladle car is a tool used to transport ladle.

In the past, when the capacity of electric arc furnace was small, the ladle of electric arc furnace steel was often carried out by lifting the ladle with a crane. Now, not only is the electric arc furnace to large-scale development, but also due to the widespread application of refining technology, the use of crane crane bag out of steel has basically disappeared in steelmaking enterprises, replaced by ladle cars, which are widely used.

Composition of ladle car:

A ladle car is a tool for transporting ladles.

The ladle car will transport the ladle to the position where the EAF steel is produced, and the ladle will be transported to the position far away from the EAF after the steel is produced. The ladle filled with molten steel not only bakes the drawing car, but also may cause damage to the ladle car when the ladle leaks steel or sputters steel. To this end, it is necessary to ensure that the ladle car has enough strength and stiffness, and there are firebricks on the upper plane of the ladle car in order to protect the car body and the drive device.

Whether it is a sliding line type steel truck or a reel type ladle car, the mechanism is basically composed of the car body, ladle support, wheels, electrode reducer, transmission shaft and coupling, cable and argon conveying device, weighing device and traction device.